> Prysmian Kable > Product > Round low volt. cables_festoon
주요특징
| Model | RONDOFLEX(C)-FC (N)GRDGCGOEU | ||
|---|---|---|---|
| Application | For use on festoon systems, e.g. on gantry cranes, hall gantry cranes, rack material handling equipment, transportation systems or machine tools. Especially suitable where power cables are expected to cause interference and disruption on data cables or where the maximum emission values according to EN 55011/55022 must be achieved. The cables are used under high mechanical stresses and frequent bending. Also suitable for use as flexible motor power supply cable. |
||
| Global data | [Brand] : RONDOFLEX(C)-FC [Type designation] : (N)GRDGCGOEU-J [Standard] : Based on DIN VDE 0250-814 [Certifications / Approvals] : VDE Reg. Nr. 7841; GOST-R |
||
| Design features | [Conductor] : Bare electrolytic copper conductor, finely stranded, class 5. Earth conductor made of tinned, extremely finely stranded copper, class FS (better than class 5). [Insulation] : PROTOLON MS high grade special compound based on high-quality EPR (at least GI3); improved mechanical and electrical characteristics [Core identification] : Light colored insulation with numbers printed in black for power and control cables, earth conductor green/ yellow [Core arrangement] : Up to 10mm²: 4-core design; from 16mm² on: three main conductors, earth conductor splitted into three parts and placed into the interstices [Inner sheath] : Basic material EPR, compound type GM1b, color: black [Screen over inner sheath] : Braid screen made of tinned copper wires, surface covered: >80%, transfer impedance <100mΩ/m at <= 30MHz [Outer sheath] : Basic material PCP, rubber compound 5GM3, colour: black [Marking] : RONDOFLEX (C)-FC (N)GRDGCGOU-J (nr. of cores)x(cross section) 0,6/1 kV VDE-Reg.-Nr. 7841 |
||
| Electrical parameters | [Rated voltage] : 0.6/1 kV (600/1000V) [Max. permissible operating voltage AC] : 0.7/1.2 kV [Max. permissible operating voltage DC] : 0.9/1.8 kV [AC Test Voltage] : 5 kV (5 Min.) [Peak voltage] : 2400 V [Max. AC voltage for connection on frequency converter] :690 V [EMC] : Main application thanks to the special cable design [Current Carrying Capacity description] : Acc. to DIN VDE 0298-4 |
||
